![]() |
||||||||||||||||||
|
|
||||||||||||||||||
|
|
||||||||||||||||||
|
|
Multifilm Packaging offers a wide variety of
bag and
pouch films, from single web films to metallized triplex laminations. Materials
suitable for both horizontal form fill seal (HFFS) and vertical form
fill seal (VFFS) are readily available for applications including
confection, snacks, dry food products, coffee, beverage mixes, and much
more. We regularly stock several grades of OPP, PET, PE and paper, and we also offer several proprietary films with unique benefits. For more information on the substrates that we typically work with, please see this list. |
|
||||||||||||||||
|
Hi-Z is an excellent alternative to triplex materials, such as PET/MET PET/PE laminates, that allows our customers to use less packaging, which saves both cost and the environment. In many cases, switching from a triplex laminate to Hi-Z can reduce the material used by over 25%. Hi-Z also provides significantly better heat seals and higher speeds than OPP/MET OPP laminates without sacrificing barrier. Hi-Z is available in 1.0 mil, 1.2 mil, 1.6 mil, and 2.0 mil thicknesses, can be laminated to OPP or PET and reverse printed for excellent gloss. It can also be laminated to a surface printed paper as a replacement for PPFP laminates in applications where the absolute barrier of foil is too expensive or simply not necessary. Hi-Z is suitable for stand up pouches with or without zippers, VFFS and HFFS applications for dry foods, confections, nut packaging, fractional pack coffee, and many more. Hi-Z also makes an excellent flow wrap material. More information is available in the
press release, here. |
|
|||||||||||||||||
![]() |
SuperSeal is a proprietary, cast-modified polypropylene sealant web that competes with OPP and PE for bag film and flow wrap laminates. With a seal layer six times thicker than most OPP grades, seals are hermetic and leakers are a thing of the past. SuperSeal has an excellent water barrier and hot tack, and easily seals through contaminations, such as food dust and spills. SuperSeal is clearer and more scratch resistant than PE, and is perfect for packing abrasive products in a clear window pouch. SuperSeal is also stiffer than PE and often allows for downgauging, which helps save both money and the environment by reducing the amount of packaging used.
SuperSeal can be laminated to OPP, PET, and paper, and is available is
many gauges ranging from 40ga to over 3 mils. The film is available in
clear or white. |
|
||||||||||||||||
|
|
N-Coat uses a new, unique nano-based technology: an ultra thin coating is applied on a 48 gauge polyester (PET) film laminated to a SuperSeal or PE sealant web. The result is a clear film with a gas barrier that competes with most metallized structures. N-Coat has an oxygen barrier of 0.07 cm3/ 100in2/ 24hrs. This is 2-3 times better than a metallized PET and almost 10 times better than PVdC coated PET at a lower coating weight and cost, and none of the negative environmental implications that go hand in hand with chlorine-based PVdC. More information is available in the
press release, here. |
|
|||||||||||||
![]() |
Multifilm also offers a multitude of other bag and pouch film structures, including single-web, 2-ply and 3-ply laminations based on the following materials:
Don't see something specific that you're looking for? Contact us, we maybe able to help you, or refer you to someone that can. |
||||||||||||||
|
Our Products
| Our Capabilities
|
Sustainability |
Quality |
Industry Resources |
Contact Us
| Our Company |
Careers |
Site Map |
|||